Recent content by Xiaro

So got the cables I needed and tested it out, works awesome! Just gotta mute the output on my computer or else the output and recording when playing an audio clip get sent twice creating a chorus effect haha. Time to put sticky notes on everything so I remember!

I have a mackie 1403 vlz3, tons of different hook up points, just not 100% sure what way to do it so that I can inject clean audio from the computer and still have everything recording and still have everyone in the podcast be able to hear themselves and the audio from the computer as well...

Currently running from my main outs on my mixer into the UR22, the ur22 is connected to the computer by usb for recording and bringing in audio clips. Can I run to trs to trs out the Line Outputs on the UR22 back into a channel line in on the mixer? Im looking at using this method to deliver...

Sounds good! So I was using the wrong cable, tried to run out to the big box stores but found nothing. Will go get 2 TRS to TRS tomorrow and see if I can get the same signal out of the mixer as into the computer like I should without the hardware interference. Pretty excited, I learned an...

Okay I found an old instrument cable (not 100% trustworthy, though it looks in good shape and is a pro series cable from years ago) Tried both Left main out and right main out into both line 1 and line 2 on the UR22. With only listening to just the DAW side (eg: mix knob to DAW and listening...

I have a cable question.......... Currently I am running a cable from the MAIN OUT 1/4 jacks on my mixer, so I am using a 2x 1/4 to 1x 1/4 jack cable... However Im pretty sure the only form that exsist in is as an insert? Should I be running 2 cables 1/4 to 1/4 and use both channels on my AI...

Actually it could be this cable im using to go from the mixer main outs to the AI. Basically what I know for SURE. I have a completely noise free source coming from mixer/comp to AI. Once connected to ai and turned up there is device noise or noise some other noise NOT from the original...

So I think what ive had is a run of bad luck mixed with lack of information and whatnot. Please let me reclarify my solution below and inform me if I am wrong. I think what happened is that I got my signal fine from the mixer to compressor or just mixer fine but when it came to the interface...

OKAY did your test. Plugged JUST my mic XLR-XLR into AI now, using the mix knob to listen in on the input WITHOUT any gain at all applied im getting a ton of static in my headset. When I turn the mix knob over to full DAW there is ZERO noise. Where is this noice coming from? Its not the...

I DO understand your point on the issue of recording 1 signal source for quality yes I prob should and will just strip down to the ur22 for recording vocals/single livestreams. My original issue and I appologiuse if it wasnt clear enough was this and ill add a few noob questions as well if you...

It just doesnt make sense to me that you get a mixer then plug a mic into it and have to CRANK the gain to 5% off max gain to get line level... This is with 3 different mics as well. Doesnt the problem seem to be right there? I guess I just dont know enough yet. My mouth is literally covering...

Well I got the mixer first (need it for adding guests to podcasts), then I had background noise issues AND knew I wanted to record vocals (rap) so using the hardware compressor seems like a better idea than software at some point. It would be nice to have it all actually working, I know I can...

Looking to use my setup to both record vocals and use mics for podcast/live streaming ect.. Hardware: Mackie 1402-vlz3 Mixer MDX4600 Hardware Compressor UR22 Audio interface Computer Shure SM7b Mic How its hooked up now: Just trying to get a non noisey/good volume signal to computer. **the...

Wrong forum= (

Thanks for the quick response! Happy to hear that I may be missing better hardware as well. Do you have any recommendations on an Audio interface that would be Quality/Cost efficient for what im doing. Around 200$ give or take your argument for spending more/less. And yes using y inserts...