Recent content by Tim Madorma

My foam was not glued well either Hey Neb_ulas, My foam was not glued down well either so I had to do it myself. I can't remember what type of glue I used now.. it has been a while. But since I did it, my Yorkvilles have been great. Nice product, but it seems they have run into quality control...

M37 and M177 sound almost identical Hi, I have both the M37 and M177. I too took them apart and noticed that they have different capsules, but identical circuitry. When I A/B tested them. It is really hard to tell them apart. Both are excellent. In the link: http://www.cadmics.com/m37.htm, it...

Found the solution rt click in the track mixer and select 'show mixer strip selections in timeline'.

Hi, It used to be that in the bottom left hand section of my n-track GUI, there were some pulldowns that I could select and click on to choose the output VU and level control - I could select between Aux1/Aux2, output, individual track and a few others. I can't seem to turn this back on. Any...

vocal recorded with AT 4033 and M37, any difference? Sklathill, I noticed that about the diaphragm size difference too. I don't think many see the GXL series as being favorable though and they seem to like the M37. Here is a response I got from CAD, but he does not mention the capsule: The...

Looks like my hunch was probably right. After reading crazydoc's response, it looks like the M177 may now be the old M37. BTW, I bought mine because of the recommendation of chessrock for a budget LD condensor and I am really glad I did. I know it isn't great, but does a good job for the $. I...

Hi, I went on CAD's WEB site to look up something regarding the M37 and saw it was discontinued. Then I went on 8th street music and saw that it was not longer there either, but the M177 is now a cheaper than it used to be - it is now $158.95 with the MZM-5 Elastic shock mount (which isn't...

CAD WEB site says it is made in USA http://www.cadmics.com/m37.htm Tim.. BTW, it also lists it as a discontinued item.. may be hard to find one. I really like mine. I have compared it to AT 4033, and AKG C3000 and it stood up very well.

Ended up buying the Yorkvilles Hey, I ended up buying the Yorkville YSM1p monitors. I could not resist the sale price of $395.00 at: http://shop.store.yahoo.com/gear1/yormon.html They sound really good - nice and flat. I'm hoping that I don't run into any problems later on.. but so far I'm...

Send an email to Yorkville Hi Nate, I sent an email to Yorkville a couple days back to ask them about this. Still no reply as of yet. I'll let you know if they reply. I'm hoping it is the older ones too.. I'd like to pick up a pair. thanks, Tim

Hi, I have been looking for some decent powered monitors for about $400.00. I noticed that many people on the forum like the Yorkville YSM1-p monitors, but I have noticed that some have spoken about a buzzing when there is a lot of low end. I saw that one person said that there was a "noise"...

Thanks Wayne Wayne, thanks for your post.. I guess using compression on drums will invariably change the tone.. I just have to find a good compromise. Your info is real helpful!

Thanks for the info Hi, thanks for the info. I think the issue is that I was expecting the compression to not affect the tone (as it does not seem to with vocals), but I'm new in this area with drums. When I look at the digital wave form for the kick, I see a very quick and significant spike...

Hi, I am trying to compress a kick drum that is too dynamic throughout the song - sometimes too soft in parts and other times blurts out.. I can control it with my RNC, but I don't like the change in tone that I get. I seem to loose a little low end thump and gain a little high end smack. It...

Got feedback from Fostex Hi, Here is an additional clarification from Fostex - a nice description: Since there is no dedicated AUX RTN INPUTS, You need to use regular input channels (A-H) as AUX RETURN Inputs. For example if you are using Input A and B as Aux Return at the mix down; Press...