sweetbeats's latest activity

  • sweetbeats
    sweetbeats replied to the thread Audio Technica AT-RMX64 Story….
    9V 50mA is 0.45VA. That’s almost identical to the two examples I gave you. Should be fine. I would not bend pins. You reflowed solder...
  • sweetbeats
    sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.
    So, if your cal tape is 250nWb/m, but you’re setting up your record side to print hotter relative to 0VU (by reducing the reproduce...
  • sweetbeats
    sweetbeats reacted to RFR's post in the thread TASCAM M-520 with Haha Haha.
    So the Fostex has a similar jumper set up? Just patch cord it up for now. Fire it up! I won’t be responding till there’s good news. :D...
  • sweetbeats
    sweetbeats replied to the thread Audio Technica AT-RMX64 Story….
    1. The AT-RMX64’s rated power requirement is 65W, so I see no reason why a 100W rated step-down power transformer wouldn’t be fine. If...
  • sweetbeats
    sweetbeats reacted to peccary's post in the thread Does it belong here or elsewhere? with Like Like.
    Wherever you post it I'll give it a read. I really enjoy reading about other people fixing things. I don't check the keyboard forum...
  • sweetbeats
    sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.
    So glad you figured it out. This is what makes it hard to sort these things out online when we can’t actually see what you see. So it’s...
  • sweetbeats
    sweetbeats reacted to RFR's post in the thread TASCAM M-520 with Like Like.
    The means the former owner most likely had the insert jacks hooked to a normalized patch bay which would act as a jumper, then lost the...
  • sweetbeats
    sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.
    Start by monitoring at the direct out jack for channel 1 to verify signal is passing through the channel before you try and figure out...
  • sweetbeats
    sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.
    Did you read my post #31?
  • sweetbeats
    sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.
    Please refer to my post #31 in your parallel thread for some guidance. But also heed @RFR’s suggestion to first just see if you’ve got...
  • sweetbeats
    sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.
    The brass is not critical…steel is fine, but I was talking about stainless steel…the one you linked is raw steel if I’m reading it right...
  • sweetbeats
    sweetbeats reacted to RFR's post in the thread TASCAM M-520 w/TASCAM 80-8 with Like Like.
    Sounds like you just want to do some recording with out dealing with the learning curve. So just use your Fostex and get busy. :D The...
  • sweetbeats
    sweetbeats reacted to RFR's post in the thread TASCAM M-520 with Like Like.
    Detailed is good. It contributes to the information archive.
  • sweetbeats
    sweetbeats replied to the thread TASCAM M-520.
    Thanks, @RFR…that’s much better to get him going. Sometimes I’m too detailed.
  • sweetbeats
    sweetbeats reacted to RFR's post in the thread TASCAM M-520 with Love Love.
    Hmm, kind of what I was gonna say but yours was much more elaborate in the explanation. May I suggest something simpler? Don't use...
Show older items
Back
Top