RFR's latest activity

  • R
    RFR replied to the thread RWRP middle pickup question.
    2 and 4 are my personal favorite strat positions. Number 4 was Rory Gallagher’d favorite position. :thumbs up:
  • R
    RFR reacted to Scott Baxendale's post in the thread RWRP middle pickup question with Like Like.
    You really want to reverse the wires on the neck pickup. If you reverse the middle won’t it now be out of phase with the bridge?
  • R
    RFR replied to the thread RWRP middle pickup question.
    @famous beagle 15minutes with a soldering iron will tell you more than all the posts on this thread. :D
  • R
    RFR replied to the thread Are we all getting “Dumber by the Minute”?.
    Great tune.
  • R
    RFR replied to the thread RWRP middle pickup question.
    I have a strat with a Duncan hot rails. I reversed the hot rails. No more out of phase. But it was in position 4. Is your out of phase...
  • R
    RFR reacted to Papanate's post in the thread RWRP middle pickup question with Like Like.
    The sound is out of phase - and I think it’s the Little 59 is a humbucker - when you pair the RWRP and the Lil 59 it cancels instead of...
  • R
    RFR replied to the thread RWRP middle pickup question.
    Then it would be just like a normal vintage strat with no hum canceling in positions 2 and 4.
  • R
    RFR reacted to Guitarquango's post in the thread Africa (Toto) solo acoustic guitar with Like Like.
    Hi folks, my tryout to bring this piece on a solo guitar... Greetings, Jimmy
  • R
    RFR replied to the thread RWRP middle pickup question.
    Yes. Reverse wind is to create the noise cancellation when in the number two position. Reverse polarity creates the out of phase which...
  • R
    RFR reacted to sweetbeats's post in the thread TASCAM M-520 with Like Like.
    Yes. Of course you can. That’s what the PGM ASSIGN 1-8 switches do for you. Each of those switches assigns or sends or routes the signal...
  • R
    RFR replied to the thread TASCAM M-520.
    For me a patchbay is invaluable. I’m running 16 tracks of tape, 2 interfaces, one 8 channel and one 16 channel. Cable runs are real...
  • R
    RFR reacted to Papanate's post in the thread TASCAM M-520 with Like Like.
    I would use the mixer because it seems easier - and a Patch bay is just one more thing in the chain to add noise.
  • R
    RFR replied to the thread TASCAM M-520.
    Regarding “assigning”…….. You can “assign” the output of any mixer channel to any tape input that you like. Let’s say if you want to...
  • R
    RFR replied to the thread TASCAM M-520.
    Let’s for simplicity’s sake, and to avoid confusion, let’s standardize the terms. Channel when referring to to the mixer. Track when...
  • R
    RFR replied to the thread TASCAM M-520.
    English please??? Are you, or are you not, getting proper signal into your tape machine??
Show older items
Back
Top