Oops! To clarify, by "outside of the machine" I meant that I uninstalled each strip and was able to spray D5 directly into each pot. I've got all of the nonfunctional strips out again as I'm going to tear down each of the faders (according to one of your videos). Thanks for your advice and I'll...
Just tried working with the right buss a bit - turns out I can get some sound if I crank the trim all the way - although it is still far more attenuated than the left buss and setting the input to tape still makes any playback inaudible.
Thanks for the tips sweetbeats!
Here's what I found:
Track 1 - no send or receive
Track 2 - no send, only receive
Track 3 - send and receive, completely working
Track 4 - no send or receive
Regarding the switches, I gave all channel strips a healthy DeoxITizing outside of the machine a couple...
Hello all, new to this forum.
I picked up a very dirty Tascam 244 a couple months back and have since replaced the belts to get the tape mechanism working again. Upon testing the inputs, I found that no sound would come out at all. Nothing in my headphones and no activity on the VU meters...