Recent content by kgmet

analog info formats There was a model between the 85-16 and the ATR60/16. This model that uses 90% + parts of the ATR60/16 was the MS16. There were various speed of this machine but it sounds great. With the ATR the last of the open reels tascam manufactured the parts are still supported. These...

I have a Soundtracs console - Topaz 24X8. I am having problems with the volume level (not enough) comming from my control room outputs. I have two sets of speakers with two seperate amps and they both have the same issue so I ruled out the speaker systems. I have used the speaker systems with...

I currently use the Event 20/20's biamp series. They sound nice but a bit boxy. I have a pair of JBL 4410's next to them and they sound "sweeter". Keep in mind the JBL's are 3way and the Events are 2way. However, I do really like the Event monitors. Before I purchased them I compared them to...

I can only tell you what they (tech support) told me. I made the switch and all was well. they stated that this is common with the cards and they designed the chip set to work with 66. Your correct the Echo reporter is a tool for information. the tracs I stated are real world tracs not from...

BEWARE..... event cards are ment to be run at 66 mhz. I had problems with my Gina and Event told me that all their products are ment for 66 mhz not 75/83/100 buss. I went back to the 66 and all my problems stopped. If the increased buss is a must then the Event cards are not for you! Also I...

I currently use the POD in the studio and I have basically stopped using my Marshall (JMP Tube) and GK2000. The POD sounds great and I mainly use it for "trac A" and then I may use the amps for "trac B". I know people who use the POD live but you must have the pedal board or it just does not...

Tube mics are nice but you are limited. If this to be a real multi use mic for various applications other than vocal or similar micing A multi-pattern condensor with tube pre always works out nice. You always have options. I use a Nuemann TLM103 (card only)and a CAD E200 (multi pattern)with a...