Recent content by electrocutioner

  1. E

    problem with Marantz PMD740

    Yes, the Tetraken video helped me too. Does anyone else have problems with the DBX?
  2. E

    problem with Marantz PMD740

    I'm interested for the service manual! I sent a pm. :) I'll try to take a few photos but let me know from where do you like 'em.
  3. E

    problem with Marantz PMD740

    Never found one! So, I'm interested, too.
  4. E

    need a master fader for Tascam M35

    Thanks for the links! It's a slide type like the links you posted on eBay, 60mm travel (88mmx24mm). They are the same pots I have found. The only problem is that the original is 10K Audio (log) and the seller has 10K Linear or 100K Audio. That's why I'm asking how the 100K will affect the...
  5. E

    need a master fader for Tascam M35

    Does anyone have the service manual? I found an Alps 100KAx4 but I don't have the schematic to check how a larger value fader will affect the circuit. Is the master fader in parallel with the submaster faders? In this case, it'll be better if it's a larger value.
  6. E

    need a master fader for Tascam M35

    Does anyone know where can I find one? It's an Alps 10KA x4 (quadruple) 88mm. Unfortunately one of the tracks is broken and buss 3 is always at maximum. :(
  7. E

    Tascam M35 pan pot

    Here it is,
  8. E

    Tascam M35 pan pot

    Mine has a broken shaft and you can't turn it at all. I have set it to the center to use the channel but it'll be great if I'll find a replacement. I was searching for blend pots but unfortunately the common values are 100K, 250K and 500K.
  9. E

    Tascam M35 pan pot

    Thanks! Yes, no problem with a pcb mount pot. Please let me know if you have something.
  10. E

    Tascam M35 pan pot

    I'm trying to find a pan potentiometer for my Tascam M35 console. Do you know any source? I don't have a problem to find a pot that it's not an exact replacement. I'll be glad if it just fit there and do the job. It's not a pcb pot. The original is an Alps 5KA.C pot. I don't know what's the C...
  11. E

    Tascam M-35 service manual

    Anyone? I can find the manual but not the service manual. I need to bring this baby back in life and maybe some upgrades. The recapping would be easy but it would be perfect if a schematic would be around. Thanks in advance.
  12. E

    problem with Marantz PMD740

    I'd be interested, too!
  13. E

    New 4-track site

    Good luck! Just started to record again on my Marantz 4-track!
  14. E

    tape recording problems

    I tried rubber cleaner on the pinch roller! Seems to work just fine right now! I'll do some more recordings and I'll let you know! :)
  15. E

    tape recording problems

    It's a cassette I found locally. Not an old one but I haven't heard the best about SA-60s. I used a head cleaner for the pinch roller. I'll try a rubber cleaner, or is it too late? I think it's wiser to find a new one. Any source? Try Marantz maybe?
See more
Back
Top