ecc83's latest activity

  • E
    ecc83 replied to the thread Can I stand on a piece of metal to ground myself instead of buying a hum eliminator?.
    The fact is friend, guitars and their amplifiers have ALWAYS* been noisy Bs! The amps themselves were often not that well designed for...
  • E
    ecc83 replied to the thread Can I stand on a piece of metal to ground myself instead of buying a hum eliminator?.
    https://www.screwfix.com/p/masterplug-13a-fused-hard-wired-active-in-line-rcd/389kg That ^ is ideal fitted in your main diss feed...
  • E
    ecc83 replied to the thread Can I stand on a piece of metal to ground myself instead of buying a hum eliminator?.
    In my opinion the bridge and thus the strings of a guitar should always be bonded to the jack earth/ground sleeve. That way, hand on or...
  • E
    ecc83 replied to the thread Tascam 34 - meters doing strange things.
    I would. love to see the schematic. "Mute circuits"? Yes SB, I have had problems with both bipolar mute transistors and FETs in the...
  • E
    ecc83 replied to the thread desk positioning.
    I didn't qualify "bass" or " mids". A sound source starts to go omni when a dimension becomes comparable to a wavelength. 1.5kHz is...
  • E
    ecc83 replied to the thread desk positioning.
    OK, Let's suppose the chaps monitors are 8ins* across? That means they are omnidirectional from about 1.5kHz down and goodly chunk of...
  • E
    ecc83 replied to the thread desk positioning.
    I am by no means an acoustics expert! But I would think facing a reflective surface is even worse than having one 3m behind you? Sound...
  • E
    ecc83 replied to the thread desk positioning.
    The good news is, your room is not a simple L to W ratio so that helps. Yes, the reflective French window could be a problem. Curtain on...
  • E
    ecc83 replied to the thread How to remove back round noise from vocal stem.
    Do it again! This time at 2am if you have to. My son spent hours practicing guitar and when he needed to do "a take" often he had to...
  • E
    ecc83 replied to the thread Boss DR-770 Runs hot ?.
    From the spec' the device requires 14V at 700mA, that is close to 10W* and that is quite a bit of power to contain in a small enclosure...
  • E
    ecc83 replied to the thread Best Wireless Lavalier Microphone in 2025? Experts Guide.
    That ^ is very interesting and it seems for once China has missed a trick? The net is awash with every conceivable sort of adapter you...
  • E
    ecc83 replied to the thread Upgrade Audio Interface: New AI or Analog mixer?.
    Let us dispose of one matter straight away? If Cioteval you seek an interface that will make a "night and day" difference from your...
  • E
    ecc83 replied to the thread Me.
    As Rob says, get some reading of the forum under your belt. As an old* 'tronics tech my Bete Noir is a post which tells of problem with...
  • E
    ecc83 replied to the thread Best Wireless Lavalier Microphone in 2025? Experts Guide.
    https://www.soundonsound.com/reviews/sound-devices-astral Eye watering amount of dosh but perhaps the best there is? Dave.
  • E
    ecc83 replied to the thread New Members: Introduce Yourself Here!.
    Yes, welcome Satchel. Your working area looks very bare and 'reflective' I see you have your mic in a Reflection Filter, never used one...
Show older items
Back
Top