drtechno's latest activity

  • D
    drtechno replied to the thread Chinese now doing Telefunken copies.
    In reality, none of that shit was hard to duplicate.
  • D
    drtechno replied to the thread SM7a/b humbucker coil.
    That is because that was added later to the D12. SM7 is on the diaphragm coil assembly like most mics engineered with a humbuck.
  • D
    drtechno replied to the thread Broken XLR Cable - Potential for Damage?.
    Phantom power is injected into the wire by current limiting resistors and are rated to take a direct short without effecting the circuitry.
  • D
    drtechno replied to the thread 8 kHz static noise in my audio recordings.
    It definitely looks like switcher noise imposing on the clock on the scope. Get an iFi iPurifier3 and that will fix the signal issues.
  • D
    drtechno replied to the thread SM7a/b humbucker coil.
    the humbucker coil is part of the diaphragm assembly and I would have to split the black piece open on the capsule. I did dissect one...
    • dsc000223.webp
  • D
    drtechno replied to the thread SM7a/b humbucker coil.
    I'll dig one out and take a picture when I have time this weekend. But the hardest thing was figuring out a way to mount it. The last...
  • D
    drtechno replied to the thread SM7a/b humbucker coil.
    The humbuker is just a counter-wind tied in series. so they act like a small inductor filtering way past the audio range and counteract...
  • D
    Since you recorded it I would try limiting to something like -3 and render that on another track, then gain stage it to -10 nominal...
  • D
    Well it really depends on what you are working with recording it. But you have to crank the gain then run it through a transparent...
Back
Top