Recent content by Arkanum Studio UK

Finished installing the larger caps, just waiting for the delivery of the others. Was a bit tricky as the leads would not reach through holes, had to twist them onto the old caps leads

Hi, Enjoyed this information on the caps ; ) I have some orange Phillips poly caps in my box of bits, 0.01uF, 400v.. Prob overkill on the voltage but would they do the trick for the bypass filtering? I spoke with Tim at Studiosystems and he confirmed that the fuse lamps are on DC 24V. Quite...

I see what i done now, i got 0.002uF! I’l order some 0.01uF : )

Hi, regarding the bypass caps, i based it on your post which stated you used 0.022uf ceramic caps? Not sure if MX is different but in MRX they are actually 4 x 15amp 6.3v glass fast blow fuses directly behind the logo which i would assume makes it glow as there is nothing else there other...

Thank you.. I will have a read through the posts on the Facebook page... I have the new bridges now and caps ready to install this weekend, had to go for radial nichicon for the larger caps due to limited stock in UK. Should be fun putting those in! Your ground mods were awesome and would love...

Greetings Sweetbeats!. Excellent story, really enjoyed this, thanks... Appreciate it has been many years since but just wondered if you recall which bridge recs you put in PSU when upgrading and doing the heatsink mod? Currently putting new caps in MRX and ordered new same recs to replace but...