DarellClark
New member
I wanted to jot down my ongoing experiences with this machine and hopefully help out any others out there who find themselves in the same predicaments.
For the pinch roller, I ordered an aftermarket roller from Slovakia against the wisdom that so many others have displayed on gearslutz. To my amazement it worked fine without wow or flutter issues. I dropped in a 13mm by 8mm by 2mm roller.
Now for the e-clip that holds the pinch arm into the transport assembly, of course it flew off never to be seen again.. However, a quick trip to my local auto center (Advanced Auto). I found a multi-pack of retaining clips in varying sizes. One of which fit like a glove.
I have not had much luck in finding this information throughout the webs, so I thought I should preserve it here! Thanks for reading. Any similar stories anybody wants to share?
For the pinch roller, I ordered an aftermarket roller from Slovakia against the wisdom that so many others have displayed on gearslutz. To my amazement it worked fine without wow or flutter issues. I dropped in a 13mm by 8mm by 2mm roller.
Now for the e-clip that holds the pinch arm into the transport assembly, of course it flew off never to be seen again.. However, a quick trip to my local auto center (Advanced Auto). I found a multi-pack of retaining clips in varying sizes. One of which fit like a glove.
I have not had much luck in finding this information throughout the webs, so I thought I should preserve it here! Thanks for reading. Any similar stories anybody wants to share?