I have an audiophile 2496 and I'm trying to set up the midi to be able to program my FCB1010 controller. The wiring is correct but it seems neither my J-Station nor the FCB are receiving midi signal from my audiophile. Suggestions?
altitude909 said:Ok,
Here is what u need to do:
In midi-ox, open options/midi devices. Highlight the in port as the port you have your keyboard plugged into, the out port should be whichever audiophile port is going out the J-Station and FCB. Click OK
The main output monitor should be open by default and to enable it, open Actions/Start Display , click the stoplight on the toolbar, or the REC in the lower right hand side of the window.
Open View/Control Panel and start playing around with those. With the monitor on, you should see it sending out msgs when u press controls. You should be able to change settings for the FCB there and if that works, then your midi interface works
chestwick91 said:ha, i had this problem, i was told that sometimes the midi in will not work on soundcards (some card address tecn mumbo jumbo crap) suggestion, take it to some computer nerds and tell them what i told you have them reinstall it