The Engineer
New member
Is there any internet site's that anybody could point me to, or have any suggestions? I'm mixing in my bedroom, and it's a square 10X12 room. My budget is anywhere around $500-$1,000. Any help?
The Engineer said:Is there any internet site's that anybody could point me to, or have any suggestions? I'm mixing in my bedroom, and it's a square 10X12 room. My budget is anywhere around $500-$1,000. Any help?
The Engineer said:Thanks Gorty. $199.99 per 2X4 Mini-traps!! I guess I'ma have to start saving. I just read in another post that a member put 2 minitraps in his vocal booth and that helped clear up the mudiness and created a better bass response.
Thanks for the post, Gorty.
Hello Engineer. Sorry if my reply was less than cordial. The fact is I have written so many replys in regards to this I've grown tired of it. But just to show you I am trying to help, I will explain something to youIt said when used with ply-wood, the 703 will absorb low frequencies. Then it said if you just fabricate the 703, then that will absorb the mid-high frequencies?
You can wrap the fiberglass by itself or make a frame so you get crisper edges. But you don't have to put anything across the back. having the 703 a little off from the wall can be done any of a number of ways but the reason why it works better is that sound bounces off the wall or gets around the side and then gets absorbed again by the back surface. So you don't want to hide the back surface behind plywood (Membrane bass traps are a different matter, I'm talking about basic DIY broadband absorbers).The Engineer said:I've noticed you've been leaving alot of feedback on these types of questions, I can only imagine your getting sick of it. I really appreciate all of the help your giving me. I called some local insulators today and no-one had any of the owens corning, except one place told me the place they buy it from, so I'll be buying some shortly. Now last question fitZ and I'll leave you alone! Can I just wrap the 703 in fabric and not use plywood? and what should I use for spacers from the wall? on realtraps.com they used like a roll of tape it looked like ... lol
Thank you for all of your help fitZ.