Budget mics. I dont want to get burned by a c1

  • Thread starter Thread starter CyanJaguar
  • Start date Start date
naww, don't be afraid. I've been placed right on top of a nice old Neumann U47 before, and no one blinked an eye about "sensitivity." Most microphones are made to handle vocals at moderate to loud volumes, unless you are blessed with an extrememly loud voice, it's gonna be tough to overload it singing close. right on top of the mic is not an uncommon technique for a really big sound, esp if the singer has a quiet voice... or in radio, you see it all the time. At the very least, it's not going to hurt you (or the mic) to try different distances, record the results, and compare for yourself... that's ALWAYS going to give you better results than using an arbitrary set of figures for "recording distance" that someone else tells you. Of course, if you're closer than say 10 inches you probably need a pop filter.
 
Cyan, you're trying to save money and get that TLM 103 sound, all at the same time.

If you're gonna pay the price of ace converters, who do you need to tell you you're gonna have to pay the price of ace mics to get an ace mic sound?

All the best,

dobro
 
Another Oh So True...

The microphone and then the preamp affects EVERTHING down the chain. Get it the way you want it going in and you'll have FAR less problems coming out! It's AMAZING what you can get with a nice front-end coming out of those little mini-disc 4-tracks with data compression and cheapo converters!

I mean you can put something REALLY good into shit and have it come out reasonable OK. But put shit into something REALLY good and you're able to REALLY hear the shit!

Of course, this is ALL assuming you have something decent going into the front-end!
 
CJ, I didn't see what pre you're using with the V67.
 
Dobro. I feel you . Inevitably, one will have to get the trusted mic to get the trusted sound.

getuhgrip,
I was using it with a joemeek vc6q which is great. Or a dmp2 which is almost as good and maybe even better in some cases.

NOw I use a symetrix 528 and a sytek mpx4a
 
You must log in or register to reply here.
Back
Top