1010 and 24/96 together?

[distortedrumble]

anyone ever used both of them on the same computer at the same time? since both have multi client drivers..I'm assuming its possible.

 

[bigwillz24]

I assume possible also but the more cards you stick in the more problems.

 

[distortedrumble]

yeah i know.....i was curious to see if anyone had pulled it off yet

 

[Alexbt]

I believe M-Audio says you can.

 

[distortedrumble]

yeah...i know they do..i just wanted to see if anyone has tried it and how tough it was....i just bought the 1010 so I'm thinking I may be able to pull off 10 analog inputs at once....the thought gets me all tingly in my legs...or it could just be high blood pressure

 

[Fire Dome]

I have a Tascam US122 is it possible to use that with the 1010?
I doubt it is possible but it would be cool if it was.

Dave

 

[LemonTree]

yeah it'll work fine if you clock one card from the other using the S/PDIF connections. Set one card to internal, go from the S/PDIF out to the IN of the other card and set it to external S/PDIF and you're rocking. I've had 2 1010's, 2 410's and a 2496 running on this system with no problems for ages now, all the Delta cards seem to live comfortably together in a good system with plenty resources.

Alec

 

[Jim Y]

If it's the 1010 rack, you might better clock the AP2496 from it as that 1010 is supposed to have a very good master clock gen in the case. 1010LT will have the same simple crystal clock as the AP2496, so pick either.

 

[Alexbt]

I've had 2 1010's, 2 410's and a 2496 running on this system with no problems for ages now, all the Delta cards seem to live comfortably together in a good system with plenty resources.
Alec

Good Gravy!

Is that like 26 channels? (Or 24?)

 

[LemonTree]

Good Gravy!

Is that like 26 channels? (Or 24?)

that's 22 analog inputs and 34 analog outputs

Obviously all the S/PDIF inputs are tied up bar one for sync issues, the spare input I have on a patch bay with various mic pre's, amp modlers patchable for recording, ok..that'ss 22 analog ins and a stereo digital in but I haven't used them all at once. I track through the 16 analog inputs of the 2 1010s, I wouldn't use the 410 inputs for recording but they do a good enough job for feeding busses on the mixer, aux returns, etc. It's a good sturdy system that gets the job done.

Alec

 

[distortedrumble]

lol so i need to go get a spdif cable...got ya