diggy_dude
Now 169% diggier!
Does anyone know if an A-2300S reel table would fit an A-4300SX? Thanks!
Blue Jinn
Rider of the ARPocalypse
I can't find the part numebr in the service manual I have for the 2300/3300. The reel table is part # 55000752 in the 4300 sm. I can pm you the pdf files, or you can get both these manuals at hi-fi engine.
diggy_dude
Now 169% diggier!
A guy who is selling several reel tables said the 2300 table would probably fit. He said TEAC didn't make very many variations of the reel tables. I popped it off and compared it to his photos. I think he's right. I'll get the other manuals from Hi Fi Engine and see if I can verify it. Thanks! 
diggy_dude
Now 169% diggier!
The part number is different, but we compared measurements, and it looks to be a perfect fit. 
J
jblmar
New member
diggy_dude,
Please contact me at the phone number you received. I'm having a hard time sending you a PM in answer to your request.
Thank you.
Please contact me at the phone number you received. I'm having a hard time sending you a PM in answer to your request.
Thank you.
diggy_dude
Now 169% diggier!
I'll give you a call tomorrow. Do you have a PayPal account?
sweetbeats
Reel deep thoughts...
Don't get too hung up on the part number variations...Teac/Tascam often changed part numbers between models even if it was the same part/assembly. I discovered this with the amp cards on the Tascam 58 and the Tascam MS-16...they are identical, but the parts numbers are not exactly the same.
diggy_dude
Now 169% diggier!
@jblmar:
I haven't been able to get to the post office yet. I had a bad motorcycle accident last week and am still recuperating. I'll give you a call in the next few days.
@sweetbeats:
Perhaps not relevant to anyone here, but... the 2300S table fits the 4300SX, but it has a smaller diameter.
I haven't been able to get to the post office yet. I had a bad motorcycle accident last week and am still recuperating. I'll give you a call in the next few days.
@sweetbeats:
Perhaps not relevant to anyone here, but... the 2300S table fits the 4300SX, but it has a smaller diameter.
R
rtrg
New member
reel tables
Yes. Most of the 7" decks of that design used the same hubs/tables. The hub bore is 6mm as opposed to 8mm. The top of the hub is machined round. The table has a cast in matching deep socket with a spring in between the hub and table. One screw next to the spindle for height adjustment. The spring holds the height.
Yes. Most of the 7" decks of that design used the same hubs/tables. The hub bore is 6mm as opposed to 8mm. The top of the hub is machined round. The table has a cast in matching deep socket with a spring in between the hub and table. One screw next to the spindle for height adjustment. The spring holds the height.
Similar threads
- rwestbrook64
- Newbies
