Hi all,
Trying to repair an sE X1 which had both wires from the pcb to the diaphragm pulled off. I managed to solder them back on again but when I switch on phantom power I get a buzz that starts soft then slowly rises to a steady loud signal, not sure if it's a ground loop or not. I recorded the output with me yelling into it and underneath the buzz I can hear a faint signal coming through.
If this rings any bells I'd love to hear your ideas.
Cheers!
Trying to repair an sE X1 which had both wires from the pcb to the diaphragm pulled off. I managed to solder them back on again but when I switch on phantom power I get a buzz that starts soft then slowly rises to a steady loud signal, not sure if it's a ground loop or not. I recorded the output with me yelling into it and underneath the buzz I can hear a faint signal coming through.
If this rings any bells I'd love to hear your ideas.
Cheers!