famous beagle
Well-known member
Ok, good questions!
Regarding the PGM BUSS inputs, I hadn't tried recording to tape from them, so I'm glad you asked about that. Here's the deal with them:
I can't hear anything in my phones or through the MON out or STEREO out jacks at all when I'm putting signal through any of PGM BUSS inputs.
I can see the signal on the meters when I either press the MON PGM/CUE button down or when I push the REC FUNCTION button down for the appropriate PGM BUSS input. For instance, I plugged a stereo signal from my phone into PGM BUSS inputs 3 and 4. When I push the MON PGM/CUE button, I can see the signal on the 3 and 4 meters. Or if I push the REC FUNCTION buttons for 3 and 4, I can see the signal. (Or if both things are done, I can see the signal.)
It does record this signal to tape; I just can't seem to hear it while it's recording no matter what. After it's recorded, I can put those tracks (3 and 4) on RMX, assign the 3 and 4 channels to L/R, and hear the playback just fine. Well, I guess I should say that, while it's recording, I can barely hear it if I turn the phones volume up to 10.
Regarding the MONITOR OUTPUTS, I'm not able to get anything at all from them, no matter what I do. I've tried everything I can think of. Even when I play back the tape, assign the tracks to L/R and turn them on RMX, I can hear them in the phones, but I can not hear anything out of the MON outputs. If I just move the cables from the MON out jacks to the STEREO out jacks, though, I can hear it perfectly through the speakers. So I know it's not a cabling issue or anything.
Regarding the PGM BUSS inputs, I hadn't tried recording to tape from them, so I'm glad you asked about that. Here's the deal with them:
I can't hear anything in my phones or through the MON out or STEREO out jacks at all when I'm putting signal through any of PGM BUSS inputs.
I can see the signal on the meters when I either press the MON PGM/CUE button down or when I push the REC FUNCTION button down for the appropriate PGM BUSS input. For instance, I plugged a stereo signal from my phone into PGM BUSS inputs 3 and 4. When I push the MON PGM/CUE button, I can see the signal on the 3 and 4 meters. Or if I push the REC FUNCTION buttons for 3 and 4, I can see the signal. (Or if both things are done, I can see the signal.)
It does record this signal to tape; I just can't seem to hear it while it's recording no matter what. After it's recorded, I can put those tracks (3 and 4) on RMX, assign the 3 and 4 channels to L/R, and hear the playback just fine. Well, I guess I should say that, while it's recording, I can barely hear it if I turn the phones volume up to 10.
Regarding the MONITOR OUTPUTS, I'm not able to get anything at all from them, no matter what I do. I've tried everything I can think of. Even when I play back the tape, assign the tracks to L/R and turn them on RMX, I can hear them in the phones, but I can not hear anything out of the MON outputs. If I just move the cables from the MON out jacks to the STEREO out jacks, though, I can hear it perfectly through the speakers. So I know it's not a cabling issue or anything.