Stogie_D
New member
Hey all, hope someone here can help me with this. I bought a MXL Guitar Cube at a garage sale the other day for 30 bucks. Person said they did not know if it worked or not. I have wasted 30 bucks on less so I bought it. Brand new in the factory box with all accessories including the book & wiping cloth. Hooked it up & no signal. After swapping Mic's, cables, channels & whatever else I could think of, no signal. I spun off the bottom retaining ring & took off the bottom cover to have a look. Check this out - it was never wired at the factory. PC board has never had a wire inserted & soldered. All wires are there & tinned properly, just not inserted & soldered. 5 wire holes & 6 wires. I think thats right, not looking at it right now. 5 holes are sized for 1 wire & 1 hole sized for 2 wires. I would love it if anyone that has one of these would take a look at theirs & tell me which wire goes in what hole. I have no problem soldering this up, just need to know where they go. MXL will not send me a schematic & don't seem to want to help. All wires insert on the component "top" side & solder on the "bottom" or solder side. A rough drawing would do fine as long as we are looking at the component side. A written explanation would work, orient from the hole for 2 wires. Don't know if this mic is worth a crap or not but would still like to get it wired & try it.
Appreciate any help.
David
Appreciate any help.
David