Robertt8
New member
Hey guys,
I had seen a great "step by step" online on how to create a new buss in Cubase to be used as a reference track.
I can't, for the life of me, find this again, but it was really simple and took less than a few steps to set up.
Can someone either point me in the right direction again or give me the necessary steps?
That said, I'm not looking to tweak a "Group Channel" as I already have a bunch of groups set up (another method).
Thanks!
++++++++++++++++
Okay...I eventually answered my own question, but for the record (and in case anyone wants to do it), here is the step by step...
HOW TO SET UP REFERENCE TRACK IN CUBASE
==========================================
1: Go to "VST CONNECTIONS” under “DEVICES” in the top nav bar
2: Go to “OUTPUTS” in select “ADD BUS”
3: Change name of new “STEREO” TO “REFERENCE TRACK” (or whatever)
4: Go to “Project window” and create new “AUDIO TRACK”. Name it “REFERENCE TRACK” (or whatever)
5: Select track and go to “FILE > IMPORT > AUDIO FILE” to physically import track.
6: While reference track is selected go to “OUTPUT ROUTING” usually says “STEREO” and change it to (new) “REFERENCE TRACK”
7: you can now “MUTE” or “SOLO” to bounce back and forth from song you’re working on and the separate “Reference Track”
+++++++++++++
I had seen a great "step by step" online on how to create a new buss in Cubase to be used as a reference track.
I can't, for the life of me, find this again, but it was really simple and took less than a few steps to set up.
Can someone either point me in the right direction again or give me the necessary steps?
That said, I'm not looking to tweak a "Group Channel" as I already have a bunch of groups set up (another method).
Thanks!
++++++++++++++++
Okay...I eventually answered my own question, but for the record (and in case anyone wants to do it), here is the step by step...
HOW TO SET UP REFERENCE TRACK IN CUBASE
==========================================
1: Go to "VST CONNECTIONS” under “DEVICES” in the top nav bar
2: Go to “OUTPUTS” in select “ADD BUS”
3: Change name of new “STEREO” TO “REFERENCE TRACK” (or whatever)
4: Go to “Project window” and create new “AUDIO TRACK”. Name it “REFERENCE TRACK” (or whatever)
5: Select track and go to “FILE > IMPORT > AUDIO FILE” to physically import track.
6: While reference track is selected go to “OUTPUT ROUTING” usually says “STEREO” and change it to (new) “REFERENCE TRACK”
7: you can now “MUTE” or “SOLO” to bounce back and forth from song you’re working on and the separate “Reference Track”
+++++++++++++
Last edited: