headphone amp to monitors?

[jman1986]

hey all, ok i need more headphone extensions... like 2-4 would be great.

now my setup is, out of the RCA's of the mixer goes into the rcas on the computer, then back out of the computer's rcas and binto the mixer rca ins. then out of the "control room" main out puts of the mixer (1/4) could i go into a headphone amp like this one here: (http://www.americanmusical.com/Item--i-BEH-AMP800-LIST ) - Behringer Miniamp AMP800 Headphone Amplifier. into the main inputs of the unit and then out of "link out a" into my monitors? i have active monitors that plug into the wall.

I dont no how else to do it.

thanks,
Jesse

Here's a pic of the back of the unit:
http://www.americanmusical.com/ProductImages/XLarge/36594R.jpg

 

[pezking]

There's probably a better connection to use from the back of the mixer.

This setup will work, however when you vary the control room level, it will also vary the level of the headphones.

Maybe you could connect the headphones to "main out" or a stereo aux send and your monitors to "control room".

What mixer do you have?

 

[jman1986]

i have a Behringer UB2222FX Pro 22 Input Mixer. i think i no what i am going to do.

out of the control outs on the back run those L & R into the headphone amp.

and then run my stereo cable wire out of the mainoutputs of the mixer and into the monitors,

should work eh? ...and i do understand that once i adjust the volume on the mixer it will effect the headphone amp (witch will effect each individual headphone.)

thanks!