Michael Jones
New member
Well, I sort of took a hiatus from the studio during June, July, and August.
Anyone that lives in central Texas would understand this.
So, with the cooler weather, I've resumed building these past few weeks.
I have one thing left to do, and I can start sheetrockin'!
I need to run a 3/8" copper line from the bathroom to the mechanical room for the humidifier.
There's a 1/2" line for the sink and toilet already there in the bathroom.
So I can just tee into that, reduce the tee, and run the line.
Problem is: I can't find ANY 3/8" copper fittings.
Everything's 1/2" or more.
I CAN find 3/8" BRASS fittings, but those are like.... compression fittings.
I really don't want to put a compression fitting behind a wall; I'd rather 'sweat" the joints in.
So.... can you solder BRASS to COPPER?
(Someone told me to look at an Air-Conditioning shop for 3/8" copper fittings.)
Anyone that lives in central Texas would understand this.
So, with the cooler weather, I've resumed building these past few weeks.
I have one thing left to do, and I can start sheetrockin'!
I need to run a 3/8" copper line from the bathroom to the mechanical room for the humidifier.
There's a 1/2" line for the sink and toilet already there in the bathroom.
So I can just tee into that, reduce the tee, and run the line.
Problem is: I can't find ANY 3/8" copper fittings.
Everything's 1/2" or more.
I CAN find 3/8" BRASS fittings, but those are like.... compression fittings.
I really don't want to put a compression fitting behind a wall; I'd rather 'sweat" the joints in.
So.... can you solder BRASS to COPPER?
(Someone told me to look at an Air-Conditioning shop for 3/8" copper fittings.)