This is easy....
Ok, all you need is a couple drill bits, some switches, and small wire. I have done these kind of mods to all my guitars. First, go find an electronics store that isn't radio shack, their switches suck and they cost like $5. I got all my switches for about $1 a piece.
What you are looking for are DPDT (double pole double throw) switches. Basically this means that it will control two circuits at the same time, which all mods other than coil tapping require. DPDT switches have two rows of three contacts:
[] [] []
[] [] [] <-something like that.
DPDT switches come in many styles, ON/ON, ON/ON/ON, ON/OFF/ON, etc. One cool thing about ON/OFF/ON switches is that it can serve double duty as a phase, splitter, series switch AND an on/off switch.... EG. Position 1: series . Position 2: off . Position 3: parrallel.
My guitar has a on/off/phase switch on the two single coils; a series/off/parallel, a coil splitter, and a selector for the coil splitter on the humbucker. Don't put the effort into putting a phase switch on every pickup, think about it.. you can leave one pickup without the phase switch.
You need some thin wire to make connections, and a drill to make holes to fit the switches in. Drill through the top of the guitar, it will be much cleaner.
That will tell you what is involved, email me at
pushit75@yahoo.com for diagrams or if you have any questions..... switches are cool!