Behringer BCF2000 with Audio In/Outs?

  • Thread starter Thread starter bradly
  • Start date Start date
B

bradly

New member
I'm am still new to all this computer interface business, so bear with me...

I got the OmniStudio USB a couple weeks ago, but today I stumble upon the Behringer BCF2000 B-Control Fader with motorized faders and the like. I really like the way the faders are controlled by the software, much more than plain, old knobs, but the problem is that it's only MIDI. Is there anything like the BCF2000 with audio in and outs also? Thanks guys.

-Bradly
 
I have no experience with any of these & there are probably quite a few around but here are some that I know are available.....

Roland SI24
Tascam FW1884
Yamaha 01X

There's also the Digi 002 surface but I think that would normally tie you to using Pro Tools LE software.

Hope this helps

Scott
 
thanks. those are what I am looking for, but a little out of my budget. The Behringer is right around $200. You can take a look at it here:
http://www.behringer.com/BCF2000/index.cfm?lang=ENG

Behringer does make a Audio version, click here to see, but it doesn't say on the web site that the fader can control software like the BFC2000 can.

-Bradly
 
I'm pretty sure that the Audio version will control the levels in your software. It's not got many faders though but it will probably let you bank through the channels on your software so should be OK.
The manual is available on the website so it may be your best bet to have a look through it & I'm sure you'll get your answers there. For your budget, it looks like it will do the job you're looking for.
Scott
 
You must log in or register to reply here.
Back
Top