Gidge
Lapdance Test Dummy
ok here are my settings......
on the first screen, i checked off all the stereo gangs....no checks in none of the mutes or solos.....all sliders pushed to max.....all pan sliders pushed to hard left and right....
in the patchbay/router, on the left side H/W In 1/2...on the right, Monitor mixer
in Hardware settings, selected Internal Xtal, 44,100 , reset rate when idle, single and in sync, and -10dbv....20ms buffer.....
spdif set to consumer and #1ap checked......
the main outs of your mixer should go to the line in RCA's of the Audiophile....from the line outs of the card to your monitors.....
go into Start/Settings/Control Panel/system/device manager and then click on computer...see if any other devices are on the same IRQ as the Audiophile.......
also, what size/speed hard drive do you have and how much space is there on it.....
lots of questions and some of them were probably already asked, but bear with me.....
on the first screen, i checked off all the stereo gangs....no checks in none of the mutes or solos.....all sliders pushed to max.....all pan sliders pushed to hard left and right....
in the patchbay/router, on the left side H/W In 1/2...on the right, Monitor mixer
in Hardware settings, selected Internal Xtal, 44,100 , reset rate when idle, single and in sync, and -10dbv....20ms buffer.....
spdif set to consumer and #1ap checked......
the main outs of your mixer should go to the line in RCA's of the Audiophile....from the line outs of the card to your monitors.....
go into Start/Settings/Control Panel/system/device manager and then click on computer...see if any other devices are on the same IRQ as the Audiophile.......
also, what size/speed hard drive do you have and how much space is there on it.....
lots of questions and some of them were probably already asked, but bear with me.....