Heya,
Wasn't sure if this was too basic for the mixing forum so I thought best post it here, apologies if it's in the wrong place.
I'm using the Behringer MX400 (gear4music.com/PA-DJ-and-Lighting/Behringer-MX400-Micromix-4-Channel-Mixer/6LZ) with 2 inputs both using 6.35mm to 3.5mm cables (ebay.co.uk/itm/1-8m-6-35mm-Jack-to-3-5mm-Jack-STEREO-Mini-Jack-Cable-Plug-6-3mm-1-4-Lead-2m/371216221318?ssPageName=STRK%3AMEBIDX%3AIT) outputting into a Sennheiser 598 that has a native 6.35mm cable.
One of the two inputs coming directly from my computer, that cable is plugged into the line in on my motherboard. The other input is coming from my Nintendo Switch. The only problem is that the audio is outputting in mono instead of stereo. Any ideas? If I had to guess i'd say it's 6.35mm to 3.5mm cables i'm using.
Thank's very much!
Wasn't sure if this was too basic for the mixing forum so I thought best post it here, apologies if it's in the wrong place.
I'm using the Behringer MX400 (gear4music.com/PA-DJ-and-Lighting/Behringer-MX400-Micromix-4-Channel-Mixer/6LZ) with 2 inputs both using 6.35mm to 3.5mm cables (ebay.co.uk/itm/1-8m-6-35mm-Jack-to-3-5mm-Jack-STEREO-Mini-Jack-Cable-Plug-6-3mm-1-4-Lead-2m/371216221318?ssPageName=STRK%3AMEBIDX%3AIT) outputting into a Sennheiser 598 that has a native 6.35mm cable.
One of the two inputs coming directly from my computer, that cable is plugged into the line in on my motherboard. The other input is coming from my Nintendo Switch. The only problem is that the audio is outputting in mono instead of stereo. Any ideas? If I had to guess i'd say it's 6.35mm to 3.5mm cables i'm using.
Thank's very much!