Thanks sweetbeats. I tried what you suggested and switched the cards. For some reason all channels work perfectly now. I'll test more but they seem stable. Maybe a card was a little off or something. Thanks for the tip!
For the head I'm not sure I see a gap at the bottom but was wondering about...
Thanks sweetbeats. Here are some photos of the head in question. I haven't switched tape recently but have been going back to older reels. The "distortion" in track 2 is more like "muddy/mushy" dropouts. Totally unusable. They just started. I do see gaps forming on the head, or am misreading the...
Hi All,
I have been thinking about replacing the recording/playback heads on my Tascam 388. Ive been getting drop outs on channel 1 and distortion on channel 2.
I found a head that is "65% still good." The price is close to $300 with shipping.
What do you think?
Is that about the what head for...
I did the same thing on my 388. Check these pics. I used some string to help evenly guide the strip out. It takes a little tug but try to be smooth and strong with it.
The reseating them is easy. Just be slow, careful, and try not to snap anything. You should be fine.
Hi Guys,
I posted this in packing 101 but thought I might get a few more replies out here.
I'm moving and bringing my Tascam 388 with me.
We're going about 900 miles across the country with the 388 in the back of the moving van. I'll pack and handle it myself and was wondering if anyone had any...
Hi Guys,
I got this old Fostex 250 from a friend because channel 2 pops. Everything else works fine and I'd love to fix it up.
What I'm getting is what sounds like a dirty switch but with cleaning (and twisting) doesn't seem to go away. Also sometimes a few pretty loud "POPS" from out of the...
Hi there,
I am thinking about renting a cheap little house in the country to do some album recording and was wondering about power issues.
I’ll have a chance to go see it before I commit and was wondering if there is a way I could test the power to see if its “clean” for recording.
I'm recording...
Hi All,
My Tascam 388 is calibrated for Quantegy 407 tape.
Would it need adjustment if I started using RMG RMGI EMTEC LPR-35?
Would I need to tweak anything or should it all be fine?
Thanks.
Success! I switched the rec/play amp card and all tracks are working perfectly again. Thanks VERY much j.harv and sweetbeats. You guys were spot on!
I used some string to get into those little tabs, and with some slow but steady pulling and rocking back and forth the card came right out. We...
Hi there,
I was wondering if anyone knows the steps to swapping rec/play amp card in Tascam 388?
I have a problem with extreme volume dips on channels 1 and 3 on my machine and would like to see if the culprit is the rec/play amp card as suggested by some kind forum members.
Also does anyone...
Hello All,
I've been working with a nice Tascam 388 recording away until today I found that when I record something on track 1 and 3 there are BIG volume/clarity dips (all other tracks record fine-including track 2). I remember this happening before on track 1 sometimes but I use that for clicks...