Br 800

riff156

New member
Hi
I.have a BR 800, when i plug a microphone into.the front right hand input jack.to record my acoustic the signal is very weak i have the input volume at maximum and it only just registers on.the leds it the same with the external mics , anyone else experience this kind of problem?
Thanks Steve
 
Is the mic a condenser microphone? If so, have you enabled the 48v phantom power? That's a very common thing if you've never use that type of mic before. WIthout the phantom power, you won't get much if any signal.

Looking at the manual, phantom power is off by default and must be turned on each time. It automatically resets each time you power off the unit.
 
Back
Top