DinosaurDavidB.
New member
I'm trying to go from guitar>M-Audio FastTrack USB interface>Logic Audio track and I'm having some issue with the monitoring. All I'm hearing is direct guitar signal. I'm not hearing the plug in (in this case, GuitarAmp Pro's) effecting the guitar.
I can hear the GuitarAmp Pro's hiss on the track. If I turn up the gain on the GuitarAmp Pro, the hiss increases on the track so the GuitarAmp Pro plugin IS there and active. What I don't hear is the direct guitar signal being processed by the GuitarAmp Pro plug in. I still only hear my direct guitar sound.
According to the docs, there should be at least a couple of ways to monitor this:
1. Software monitoring. You can hear the effect plug in but it doesn't record. This is great for putting verb or delay into your headphone mix, but not actually recording it to the track. I'm haven't got this working.
2. Input monitoring. Isn't this the one where you hear what you're recording while you're recording it, in this case, a guitar being processed by a plugin. The kind of monitoring where latency can be a factor. This isn't working either right now. My understanding was that this type of monitoring is related to the I (input monitoring) and R (record enabled) buttons on the channel strip.
On the Mac itself:
The AMS shows that I DO have the FastTrack selected for the Default Input, the Default Output, and the System Output and the Properties For is also set to the FastTrack.
The Mac's Sound preference shows that I have the FastTrack selected for the Output, and the Input.
And in Logic, the FastTrack is selected and enabled in the Core Audio.
I'm very new to this setup and Logic, and this is probably something very simple that I'm missing, but I'm stumped.
Can anyone help? Thanks.
I can hear the GuitarAmp Pro's hiss on the track. If I turn up the gain on the GuitarAmp Pro, the hiss increases on the track so the GuitarAmp Pro plugin IS there and active. What I don't hear is the direct guitar signal being processed by the GuitarAmp Pro plug in. I still only hear my direct guitar sound.
According to the docs, there should be at least a couple of ways to monitor this:
1. Software monitoring. You can hear the effect plug in but it doesn't record. This is great for putting verb or delay into your headphone mix, but not actually recording it to the track. I'm haven't got this working.
2. Input monitoring. Isn't this the one where you hear what you're recording while you're recording it, in this case, a guitar being processed by a plugin. The kind of monitoring where latency can be a factor. This isn't working either right now. My understanding was that this type of monitoring is related to the I (input monitoring) and R (record enabled) buttons on the channel strip.
On the Mac itself:
The AMS shows that I DO have the FastTrack selected for the Default Input, the Default Output, and the System Output and the Properties For is also set to the FastTrack.
The Mac's Sound preference shows that I have the FastTrack selected for the Output, and the Input.
And in Logic, the FastTrack is selected and enabled in the Core Audio.
I'm very new to this setup and Logic, and this is probably something very simple that I'm missing, but I'm stumped.
Can anyone help? Thanks.