diy reamping box

kip4

kip4

Well-known member
Has anybody got a good schematic for a simple to build passive diy reramping box.
I've ggogled it and came up with some ideas and schematics (mostly usa but i'm uk based)
I'm thinking it could be a good beginner project and definitly something i could do with.
all advice and suggestions welcome.
Thanks for reading
 
thanks jimmy
I'll probably get one anyway it will do meantime.
but i still really want to make my own and include a groundlift if possible just as a progressive project from my last one (A/B box)

and btw if anyone have a simple passive schematic for an A/B/Y box this would be welcome also
mmmm maybe i should start another thread for this
thanks guys
 
You will also need a 1/4" to XLR female from interface, mic cable, and an XLR male to XLR male adapter to the CP8201 into amp. :)
 
my interface has all balanced trs connections m audio delta 66
so i asume i will go interface out (trs)> to trs input on cpr802> to amp
mic On cone of cab> preamp> interface
No?
 
kip4 said:
my interface has all balanced trs connections m audio delta 66
so i asume i will go interface out (trs)> to trs input on cpr802> to amp
mic On cone of cab> preamp> interface
No?
Click to expand...

The converter has XLRF on the low impedance side so you'd need a TRS-XLRM cable.
 
unfortunatly the CP8201 is not available for sale in the uk grrrr
i rang audio technica and they suggested using a radial reamp box
 
You must log in or register to reply here.
Back
Top