Search results

  1. ranjam

    tuning telecaster

    Use the 9.5" gauge, and Bob's yer Uncle.
  2. ranjam

    What is the reason for the detachable power cords on amps?

    You can buy IEC cords with a 90° angle; And I've always theorized it is something to do so you get away with a cheaper UL or CSA approval. Ditto for anything that does not have an internal power supply, and I've seen mixers, dbx compressors, and other gear do this. Cheaper to make, cheaper to...
  3. ranjam

    Marshall Speaker Cabinet Mod Opinion Request

    Fender has been doing it for 912 years. My 60's Bandmaster cabinet has fiberglass batting. I get itchy just thinking about it. Does it work? :confused:
  4. ranjam

    Considering some DIY work

    This should explain it all: Now, if the neck is back bowed, loosening the truss rod should help, and can never hurt. ;) Just don't go too far, and have an up bow!Loosen it maybe a 1/4 turn. If that seems better, but still not enough, another 1/4 turn is all I'd go. After that, I'd take it to a...
  5. ranjam

    Amplifier problem..

    Well, you can now learn to troubleshoot. Start with the obvious; the cable, then the guitar. If that's OK, move onto the speaker. Grab the speaker lead, and put a 9-volt battery on it, thusly; Just touch the battery to the 1/4" plug quickly, and you should hear a 'pop' from the speaker, and...
  6. ranjam

    MIC Repair Help Needed

    This may help, or this may not help. :rolleyes:
  7. ranjam

    Need a little help with my peavey windsor

    Remember, this is all just my opinion, and my tastes may not be similar to any sane or rational person, real or imagined. Anyway, here is the preamp; What I've circled in red are the treble peaking circuits. Also, circled in blue can be considered a treble peaking circuit. It's the cathode...
  8. ranjam

    Has ANYONE had luck getting Cubase Support?

    .......good or bad? :confused:
  9. ranjam

    Pedal Question

    Keep in mind with anything I say you should ask yourself 'What the Hell does he know?' Also, I have no idea how to resize any drawing I uploaded, so I apologize for the excessive size. :o Now, any 'clean' boost, or straight preamp is usually just a simple op-amp, like so; .......clean, and...
  10. ranjam

    When is it time for a fret job?

    My muddled thought was that if the fret was worn or pitted in a way that the crown or high point isn't dead center of the fret anymore, the temperament could get worse, and I would imagine I'd hear it more than ever. I doubt the fret wears perfectly flat or symmetrical, but I may be wrong. Which...
  11. ranjam

    When is it time for a fret job?

    You should be able to feel when you need a fret job; Go by how many guitars you have, how often you play each one, and how fussy you are about that guitar playing as perfectly as possible. Weird things like what strings you use make a difference. For bass players, flat wounds have minimal...
  12. ranjam

    TS 808 build help

    I really don't get the point-to-point fad. You want to cram all this; ..... into a pedal without the benefit of a circuit board to hold parts, avoid shorting leads, and be compact? :confused: The 'best' kit may be the General Guitar Gadget, but BYOC has a BD2 clone that can be modified to be...
  13. ranjam

    buying some more test equipment

    Those would be 'emission' testers, which aren't too reliable or sought after today. The TV guys (at least around here) seemed to like B&K, and B&K made a plethora of different testers for every budget. Ham guys like to build, so they might have a 'kit' like Eico or even Heathkit. But those...
  14. ranjam

    This is pretty, but need a maple fb.

    This is mine; I did swap the pickguard for a 'plain' w/b/w version, so it looks less 'pretty'. Still, a very cool bass that I get compliments from the guys I do my two or three bass gigs a year with.
  15. ranjam

    who is the amp guru

    The best way I've found to 'see' a tremolo circuit in action is with a plain old-school analog voltmeter or even a VTVM, like so; As the 'Speed' control is set higher, the needle should swing faster. Assuming the wiring is right (even if you check all capacitors and resistors for value...
  16. ranjam

    Tube swap

    Me being the eternal tinkerer; -Remove R15, R16, and C14. -Don't add a Master or a tone control. If you have to have a tone control, replace R17 with a 100K linear taper pot. -If you want some more low end, replace C1 with a .022uF/630VDC capacitor. _Try different speakers. That should give...
  17. ranjam

    How to fix the volume issue on a Fender Hot Rod Deluxe

    I believe logarithmic controls were supposed to work with how our ears perceive volume increases. Linear controls are more or less voltage dividers, and you don't see them often in guitar gear. I sometimes use them as tone controls in a guitar, because that's where the 'it's either on or...
  18. ranjam

    cymbals AHHH!!!

    There's always exceptions, if you waste enough time trying everything. I've had some Meinl 'stamped sheet metal' cymbals, and they were actually fine. These were really old, though, and not the new stuff. The hi-hats were very decent, and a 16" crash sounded surprisingly good. The hats looked...
  19. ranjam

    What can you say about this drummer?

    Solid, non-drinker, and won't hit on your girlfriend. :laughings: [VIDEO]
  20. ranjam

    Weird License Download Issue?

    I don't know if this has been asked before, but a quick look-see makes me think this doesn't appear to be so, so I'll ask now. If this is redundant, I apologize now. Anyway, I tried installing LE4 that came with a Zoom product. Everything went smooth until I tried to download my license. Now I...
Top