80-8 schematics & manual - Fuse #7
- Thread starter lassoharp
- Start date
sweetbeats
Reel deep thoughts...
Well, after looking at it for a few minutes I've concluded that its wicked confusing!
But F7 powers terminal 5 on the input side of the power supply PCB, which is the unregulated side of the 24VDC rail...so it has to do with your motors and such.
What's happening?
Greetings, BTW...
But F7 powers terminal 5 on the input side of the power supply PCB, which is the unregulated side of the 24VDC rail...so it has to do with your motors and such.
What's happening?
Greetings, BTW...
lassoharp
New member
Greetings sweetbeats,
That makes sense. With that fuse blown none of the transport functions work. The relays activate but the motors on either reel don't engage.
That fuse blew on power up yesterday. I tested with a a slightly lower, 2A fast acting type and it held just fine - and everything worked as normal. I think the PS may be due for a recap.
cheers
That makes sense. With that fuse blown none of the transport functions work. The relays activate but the motors on either reel don't engage.
That fuse blew on power up yesterday. I tested with a a slightly lower, 2A fast acting type and it held just fine - and everything worked as normal. I think the PS may be due for a recap.
cheers