Blue Jinn
Rider of the ARPocalypse
1. I just built a single sided G7 and didn't really pay attention to which transformer lead went where.
2. I have two Tascam boards which are both pin 3 hot so most mics I have are going to already be out of phase, (and one board doesn't have a selector to change phase.)
3. I do have a pair of "BigUgly's" that I wired with pin 3 hot for this reason.
2. I have two Tascam boards which are both pin 3 hot so most mics I have are going to already be out of phase, (and one board doesn't have a selector to change phase.)
3. I do have a pair of "BigUgly's" that I wired with pin 3 hot for this reason.