I just picked one up and am thoroughly confused by the routing options. I can't get any signal through the inputs in the back. Do I need to route further to assign a channel to a fader? The only time I hear a signal is if I plug something into the monitor ins. Nothing seems to be coming out of the output either and its not the headphone jack, is it just fried or broken? I can't find a manual so I ended up here.
This mixer has direct out, rcv/access/send/, buss in, buss out, meter in, master buss and monitor ins. Then there are the aux pans, pre and post. I"ve tried different combinations of RCA to RCA routing with the busses and just cant figure out how to simply get a signal through this mixer.
This mixer has direct out, rcv/access/send/, buss in, buss out, meter in, master buss and monitor ins. Then there are the aux pans, pre and post. I"ve tried different combinations of RCA to RCA routing with the busses and just cant figure out how to simply get a signal through this mixer.
Last edited: