I am sorta confused about what you mean by the tape outputs, i don't see anthing in pro tools that says i can pann that right speaker to the right, I went into my I/O settings and everything is fine, all my connections are fine to.
not in Pro Tools...on the mixer.
Okay, let's work this from the beginning.
1) You have two microphones on a guitar cab (or whatever you're micing).
2) Each microphone is plugged into it's own XLR input on the mixer....so it each has it's own channel
3) Those two channels are being fed to the main output on the mixer. At the same time, it's also being fed to the tape outputs (in stereo)
4) To get each microphone to be fed to it's own individual output, you need to pan the first channel on the mixer to the left...and the second channel of the mixer to the right. This sends channel 1/mic 1 to the Tape Out Left and channel 2/mic 2 to Tape Out Right.
5) Connect the mixer to the Audiophile card with TWO RCA cables. One plugged into Tape Out L that runs to Audiophile input 1, and the other cable plugged into Tape Out R that runs to Audiophile input 2.
6) In Pro Tools create two mono tracks (or one single stereo track...they're the same thing essentially) and set the inputs to Channels 1-2.
7) Record arm the track(s) and you should see level on both sides
8) Plug the outputs of the Audiophile into a pair of speakers