Valley Arts Kid
New member
Can someone plesae explain to me how to sync a DR-670 with a BR-1180, in such a way that I won't have to get a headache? The goal is using the BR to control the DR. 
DR-670 / BR1180 sync / midi
- Thread starter Valley Arts Kid
- Start date
Zaphod B
Raccoons-Be-Gone, Inc.
I don't have a BR-1180 but I'll give it a shot in general terms.
First, connect one MIDI cable between the two units - from "out" on the BR-1180 to "in" on the DR-670. Connect audio cables from the outputs of the DR-670 to channel inputs on the BR-1180.
Set your BR-1180 settings so that its sync source is internal, not external.
On my TASCAM 2488 those settings are in the MIDI settings area, with generator = CLOCK and internal/external set to INTERNAL. You should have something similar on your unit.
Check your BR-1180 documentation for the details.
Good luck!
First, connect one MIDI cable between the two units - from "out" on the BR-1180 to "in" on the DR-670. Connect audio cables from the outputs of the DR-670 to channel inputs on the BR-1180.
Set your BR-1180 settings so that its sync source is internal, not external.
On my TASCAM 2488 those settings are in the MIDI settings area, with generator = CLOCK and internal/external set to INTERNAL. You should have something similar on your unit.
Check your BR-1180 documentation for the details.
Good luck!
Valley Arts Kid
New member
Thanks!