fuzzsniffvoyage
Well-known member
2 channel preamp. The left channel mic input is not working, but the instrument input is. The VU meter moves and sound comes out for the DI, but no VU or sound on the mic. Checked cables and mic. So this tells me it's not a bad tube and the complete circuit is not bad, am I correct?
So I checked the xlr connections on the back, opened the box up and continuity tested each pin from the in to the ribbon cable that takes the signal to the main board.
I did not dig any further, I know very little about electronics. (Well enough to know don't mess with it.) I can solder a bit, and have been building my own fuzz boxes from other peoples designs off You Tube.
I sent ART an email asking for authorized repair centers. But could this be an easy fix?
Any ideas? Thanks.
So I checked the xlr connections on the back, opened the box up and continuity tested each pin from the in to the ribbon cable that takes the signal to the main board.
I did not dig any further, I know very little about electronics. (Well enough to know don't mess with it.) I can solder a bit, and have been building my own fuzz boxes from other peoples designs off You Tube.
I sent ART an email asking for authorized repair centers. But could this be an easy fix?
Any ideas? Thanks.