![]() | ![]() |
|
#1
|
|||
|
|||
|
Alesis 3630
I have spent about an hour reading the trashtalk for teh 3630 compressor, and I have had some pretty good chuckles!
If the 3630 is so bad, what do you suggest for the same kind of price that would be an acceptable compressor? I was just recently given an Alesis Nanocompressor, and I haven't used it yet. JImmy
__________________
Crazy Lighting Designer/Musician |
|
#2
|
||||
|
||||
|
The RNC!!!!!!!!!!!!
|
|
#3
|
|||
|
|||
|
WHERE???
Mister Q, where do I find this famed RNC, and what model do I want?
Who sells them? Can I get one from eBay?
__________________
Crazy Lighting Designer/Musician |
|
#4
|
||||
|
||||
|
|
|
#5
|
|||
|
|||
|
Q, is it worth it at all to have the 3630?
I can get one for FREE. I've never had a compressor before, and I want to learn. jimmy
__________________
Crazy Lighting Designer/Musician |
|
#6
|
||||
|
||||
|
The 3630 would be your WORST choice as a hands on learnig tool
on compression as the unit introduces "noise" during comp'ing applications! The RNC on the other hand offers clean & transparent processing, simple to use and affordable! Yo' jimmy, if U utilize the "SEARCH" function of this BBS, you will read a godzillian posts made by members here singing it's praises !! Go for it! ![]() |
|
#7
|
|||
|
|||
|
FMR Audio?
The RNC is made by FMR Audio, right?
When I look for it online, that's what I end up with. Anyone other than Mercenary Audio have these?
__________________
Crazy Lighting Designer/Musician |
|
#8
|
||||
|
||||
|
www.samash.com also carries RNC's (at least the NYC location does) but for some reason never lists the unit in it's catalog.
|
|
#9
|
||||
|
||||
|
Quote:
where I stated wierd bass efx can be obtained from the 3630 by incorporating non-standard thresh & attack ratios? Or it's usefulness in some occasions controlling annoying "hiss" produced by drum machines? And givin' U madd luv on a funk track you recorded where U stated if I can tell the diff bet 3 songs recorded using 3 diff comps? In addition, when U were disguising your self as "Creepy"(LMAO )which U again stated thatthe 3630 provides more than adequate bass-tracking processing? Remember??? Yo' Ed-uardo, the majority of your comments on the 3630 always refer to bass or percussive compression rather than it's overall use on tracking altogether! Can U tell me what else U find the 3630 other than bottom? Sib ctl on vocs? Peak levelling on reed or brass? Shelving hi-end on screaming, distortion-filled git track? U know I got big respect for you, but d@mmmnnn, the 3630??? It was my 1st comp and I would sit there from days on end experimenting with diff settings trying to find that right level adequate for recd'ing. Shoot, my 2nd comp, the Auto-Comm, gave me at least the beginnings of clearer comp'ing! After cuzzin' Brucie-Blue-Bear twisted my arm on the RNC, I gave in and compared to the 3630, no contest & you know it Ed-die Munster!!! Again, big props to you as U and Long Wave Studio are prob'ly the ONLY ones who can make the d@mn thing work! But at least the AutoComm or Composer,comin' in at less than $99 or so less w/b a better choice than the 3630! And don't U start bringin' up the Crane's 'cause even I know that they're above the aforementioned! Peace, my brutha' from anutha' mutha'!! Tell "CREEPY" I said Wassup!!! ![]() |
|
#10
|
||||
|
||||
|
Sonusman I am looking forward to that.... I use a 3630 for the noise gates and that is about it..
|
|
#11
|
||||
|
||||
|
Quote:
You're on, but I gotta' better idea!!!!!....................... If I can't tell the diff between the Composer & the 3630 (and remember, I got both of 'em ) and discover I'm wrong, how'za' bout U attendin' JAMFEST 3 courtesy OF ME!!!!!???? (I'llHELP contribute to your cost of air-fare AND give to you PERSONALLY, my 3630 in it's original carton...details later!!!....I'll email ya'!) But if I get 'em right, you master 3 or 4 of my crappy-ass songs!!! I'm SERIOUS!!!!!(beware of the ear!!! )!.Buttttttt, U gotta' tell me which track,instrument, etc has been processed and no throwin' in the Crane to throw me off!!! OK!!?? It's on now baby!!!!!! Bwa-hahahahahahaha!!!!LOL!!!! Do you agree to stated terms!!?? |
|
#12
|
||||
|
||||
|
cool!!
|
|
#13
|
|||
|
|||
|
sonusman, Q
Well I am not in Portland, but I am close enough in Vancouver. Right across the river in fact. If you would like, I can oversee this little experiment of yours. Let me know if you are interested. Of course, I am not that well known, so if you choose to not have me involved, I understand. Curious to see if my 3630 could possibly be worth something. brutus |
|
#14
|
||||
|
||||
|
Q....send me the clips and I'll help you. If I get it right will you pay for my car rental for a single day on the Sunday of the BBQ Fest?
If I get it wrong I'll master 3 of your songs? You cant really lose to much cause either way you get songs mastered.All this of course if Ed doesnt mind. I havn't used a 3630 in quite a few years but I have confidence..... ![]() |
|
#15
|
|||
|
|||
|
sonusman,
That is cool. And heck, I will even offer up my 3630 for use if needed. Thanks for the consideration. brutus |
|
#16
|
|||
|
|||
|
No problem, sonusman...perfectly understandable.
![]() brutus |
|
#17
|
||||
|
||||
|
Quote:
|
|
#18
|
||||
|
||||
|
Quote:
I think QQ better start saving money to backfill all his compressors that he is giving to Ed. SoMm |
|
#19
|
||||
|
||||
|
Quote:
Believe me !!!! I have a pretty good set of ears on my big head!! LOL!! ![]() |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|