Connections Panels...does this look good?

[Myriad_Rocker]

Here's my layout or thoughts for the connections panels that I'm going to need in my studio build. Let me know what you guys think of these or if I might be forgetting anything. I'm thinking of having RedCo make me some custom panels for this stuff.

Live Room

• Mic/TRS - 16
• TRS - 2
• Speaker - 4
• Headphone - 6
• DVI - 1
• Cable/TV - 1

Control Room

• Mic/TRS - 20
• TRS - 2
• Speaker - 4
• Headphone - 10
• DVI - 2
• Cable/TV - 1

ISO 1

• Mic/TRS - 2
• TRS - 0
• Speaker - 0
• Headphone - 2
• DVI - 1
• Cable/TV - 0

ISO 2

• Mic/TRS - 2
• TRS - 0
• Speaker - 0
• Headphone - 2
• DVI - 0
• Cable/TV - 0

[Myriad_Rocker]

I'm assuming I'm not forgetting anything...

[RICK FITZPATRICK]

Control Room
Mic/TRS - 20
TRS - 2
Speaker - 4
Headphone - 10
DVI - 2
Cable/TV - 1

Hi M-R. I'm a little curious why you would want TEN headphone connections in the Control room. Unless you are talking about feeding ten seperate headphone mixes to different rooms from the control room...which seems a little strange to me.

[Myriad_Rocker]

Originally Posted by RICK FITZPATRICK

Hi M-R. I'm a little curious why you would want TEN headphone connections in the Control room. Unless you are talking about feeding ten seperate headphone mixes to different rooms from the control room...which seems a little strange to me.

6 for the live room and 2 for each iso booth. I would just run cables to those connections in the control room from a headphone amp. Those connections would then go to the corresponding input in the rooms.