cant get audio from tape to cep

[oczad]

I have a Maudio delta 44 4 channel card that i only use occasionally to play back 4 channel audio from CEP's multitrack section. But the other day for the first time i tried to record audio on my PC with it and i cannot get it to work.

What i did was attach the 4 tape outs from a 4 track cassette to the delta breakout box inputs. The sound IS getting to the PC because when i open the delta mixer panel it shows levels moving as i play the tape. But the sound is not getting into CEP's multitrack section. I assigned each of 4 tracks in the CEP multirack to the delta card by clicking the record button on each track and choosing the delta. This was of course after having gone to options/device order/recording and adding the delta 1/2 and delta 3/4 from the "unused record devices" to the "multitrack device order" window. I have als tried the windows volume panel.......the record one, and made sure i added all sliders and tried various ones. I have also tried everything imaginable in the delta's mixer panel. But no matter what i do, when i set the 4 tracks in CEP to record ready and set it rolling with the tape machine going, no audio get to it.

any ideas?

[lukeslim]

Hi,
You my not have selected the sound card in your audio set up properly.
Just a thought,if you have XP click on control panel>Sound and audio devices>
Click audio tab and then choose your sound card for recording.Your M-Audio card.

Also check that your channels in the Deltas mix panel are not muted.

Hope this helps
Luke

[oczad]

Yeah, i've done all that already. thanks anyways.