Monitor / Patch Bay

jonmmartin · #1 01-06-2005

Can I run the outs from my power amp (75 watts per side) to my patch bay, connect my speakers ( 2 sets) to the patch bay and use the bay to go back and forth between my different monitors. Will this set up affect any of the other equipment connected to the patch bay?
Thanks for the help.

Big Kenny · #2 01-06-2005

Samson makes a C- Control that you can run three sets of monitors and a talk back. Inexpensive solution.
http://www.zzounds.com/item--SAMCCONTROL

jonmmartin · #3 01-06-2005

Big Kenny,
Thanks for the reply...I went to the link and the reviews for the C-Control were not very good. I was hoping I could just use my patch bay...any problems with doing this?

Atterion · #4 01-07-2005

C-control is designed to be installed Pre-Amplification and fed with line level signals.
Provided each pair of inputs and outputs on your patchbay are completely isolated cards (Including Groud), it wouldn't necassarily affect other items on your patchbay. However I would recommend you build a simple switch box. Quite simply a pair of inputs for your amp wired to as many pairs of outputs as you have speakers, with a switch for each set speakers (essentially the same thing as Home stereo receiver amps use to select between multiple speakers hooked up to them). You could build it for dirt cheap money with parts from radioshack or equivalent. Real Simple!!!

MadAudio · #5 01-07-2005

NO! Do not run power through your patchbay! What you need is a speaker switch box.

Farview · #6 01-07-2005

Don't do it.The cross talk will suck and when you change speakers you will be running the amp without a load and shorting the outputs of the amp while you plug and unplug. Get a switch.

earworm · #7 01-08-2005

additional question,

what do u guys do:

hook up your (active Event Tr8) monitors directly to your Soundcard (motu 828 with a nice volume control button on the front)

or do you connect your soundcard -- mixer -- monitors ?

right now i got my Motu connected to my mixer first, this is handy for controlling the volume,
but i think this doesn't give me thé cleanest sound since my mixer is years and years old

so how is your setup ?

thx

Farview · #8 01-08-2005

source > mixer > monitors.

Blue Bear Sound · #9 01-09-2005

Quote:

Originally Posted by jonmmartin

Can I run the outs from my power amp (75 watts per side) to my patch bay, connect my speakers ( 2 sets) to the patch bay and use the bay to go back and forth between my different monitors. Will this set up affect any of the other equipment connected to the patch bay?
Thanks for the help.

You can't run anything but line-level signals thru your PB... the connectors will NOT take a powered signal without literally blowing up or melting... (switchboxes that accept speaker signals use relays for the switching and can handle that level of signal -- PBs are not designed for this.)

jonmmartin · #10 01-10-2005

Thanks for the info regarding the patch bay. Speaker switching boxes..which one should I get...one that is transparent. I just want to be able to check my mixes on more than one set of speakers, so I need a switch that doesn't add anything to the signal.

Blue Bear Sound · #11 01-10-2005

Presonus Central Station..... it's a bit more than a switchbox, but it is transparent.

Farview · #12 01-10-2005

Quote:

Originally Posted by Blue Bear Sound

Presonus Central Station..... it's a bit more than a switchbox, but it is transparent.

I think he is looking for post amp switching. I think you can still get a Switch Witch.