Recent content by rtrg

  1. R

    otari mx50

    Tape format and connection types for MX50?
  2. R

    service manual

    ANY link to, website, personal contact for the SERVICE MANUAL for the REALISTIC,radio shack, TR3000 open reel welcome. In this case TEAC built it for RS. Then redesigned it for itself calling it the X3 and then the X300. I have the both of the latter. I NEED the former. It does not seem to exist...
  3. R

    otari

    What OTARI model/s are either 4 track 2 channel, 4 track 4 channel for both record and play? I know some 2Ts had a 1/4 track play head, and some 1/4 Ts had a 1/2T play head. I need a TRUE 1/4 TRACK or 4 CHANNEL I can use as a 1/4 TRACK like the TEAC 3340. Model numbers please. Searching by...
  4. R

    teac/tascam open reels

    Can someone tell me the head wiring for the following teac models--- A-2300,2340,3300,3340, I need the colors of the outer sheaths of the wires that connect to the head tracks and which color represents which track. The record head and play head for the various models are different based on...
  5. R

    1/4 track, large reel, slow speed tape deck

    Looking for any working 4 track 2 channel 3 head, 3 motor, nab reel, low speed as in 3.75 IPS tape deck. Teac 3300, 3340, AKAI 600 series, SONY 700 series come to mind. It need not be pristine. But it MUST be 100% functional. And CHEAP. I can do minor repair but nothing extensive. Reply to...
  6. R

    head stack wiring

    I need the colors of the leads running between rec amp and erase/record/ and play heads for TEAC A-2300S and A-3340S. What colored lead represents which track. Both those leads that solder to the head pins and those that use connectors on the head pins. The play and record head pin arrangement...
  7. R

    teac parts

    What is the capstan pulley size in inches for teac 3340? Is the pulley for the 2340 1/2 that size? If yes where can I buy one? I need to half the speed of a 3340 in order to play tapes from a slower unit. That unit is long gone. This unit was FREE. I have no intention of buying a machine just...
Back
Top