Recent content by Fenderguy81

No unfortunately the LED is still not working. That makes sense that the LED is D12. I am trying to clarify with Dave how to go about checking it. As I mentioned, it has 4 points (3 in a row and 1 underneath). I am just not sure were to attach the alligator clips and what setting I should put my...

Thanks for the reply, but a lot of the component numbers, such as D12 do not cross over to this PSU. To be honest, a lot of what you're asking is a bit over my head as I am not too electronically savvy. Here's a few more pictures of the PSU for reference. I have a multi-meter and will try to...

Thanks for the info guys. I replaced the two larger caps on the end to the left. I made sure to put them in the same direction as the old caps. I do have a multi-meter, which I was able to use to check continuity on the circuit board. Beyond that, it's a bit over my head, but if anyone has any...

Hey guys I have a MXL Gensis mic that was humming so I opened up the power supply and found what looked like a bad capacitor. I changed out the 2 larger caps with the same value and now the power supply is not powering on fully. The switch is lighting up where the AC cable is inserted in the...