Recent content by faxquo

Skipping Have you checked the Virtual Memory settings on your computer, could be set too high. Just a thought! I had a problem with skipping, it went away when I disabled the wireless LAN connection whenever I started Cubase. ... yeah I know...I'll eventually pull a wire to the studio.

Sketchup Great work Rick ... I think it might be some of that acad experience peeking through.... looks like it took a wee bit of time.

Theft and the Law You nailed it Gecko :D

Buzz....ards I opened every outlet box to check the wiring, I found 2 boxes where the ground wire wasn't even attached to anything (one was a fan box in the ceiling) and in another they had swapped the neutral and hot posts in the receptacle. Hopefully the 100 year old house has been re-wired...

Inputs The UAC200 only has 2 inputs (Left and Right) this then connects to the computer via the USB port. The mixer is where all the inputs go, these get routed to the UAC200 input. This way I can send any signal to the UAC on the Sub Out 1-2 of the mixer by depressing the 1-2 button on that...

Design Software Any 3D CAD software should work, if you want to really do it right: AutoCad Revit® Architecture http://usa.autodesk.com SolidWorks http://www.solidworks.com/ ArchiCad http://www.graphisoft.com/products/archicad/ Some less costly options could be: SketchUP...

Integrity It's one thing to pirate software when you're 14 and just want to try it out ....but after you grow up..BUY IT! If you can't afford it, use shareware until you can. A few companies don't mind that their software is used to learn with because when the kids grow up and start working...

Hard Drives I've had 3 Seagates crash on me ..... My vote goes to Western Digital (haven had any failures as of yet) Also, I thought that Pro Tools doesn't support Raid configuration drives...am I wrong?

2442 hookups I really don't know which hook-up method is the best, but this is how I have it set up so I can send the output to mains or monitors or both. Sub 1 Out to UAC200 Input...and UAC200 Output to 15/16 Line in L & R, when I am recording the Sub 1-2 button is depressed an any channel I...

Connections Do you have the Source CD/Tape button depressed and Phones/Ctrl Room knob turned up? I have mine hooked up Sub 1 Out to UAC200 Input...and UAC200 Output to 15/16 Line in ... that's been work pretty well for me so far.

Inputs and Outputs on the UCA200 Assuming that you have checked the connecting cables and they are firmly seated....where are the Inputs and Outputs of the UAC200 connected to on the 2442? And as Audio-Man stated, check to see that phantom power is off.

Xenyx2442 with USB Did you check the Audio Device type in the AUDIO tab of Ableton, is the driver ASIO? You can check to see if it is working by clicking on the Test Tone button You should hear the Test Tone. Also you might check your "Sound and Audio Device" settings in the Control Panel if...

Using a garage I'm using a portion on my garage as a studio/practice space, the construction of the false wall and trapping isn't done yet, for the time being I'm using blankets and some cheap foam "fatigue mats" on the side door at least until I can get more cash. Monitors are on their...

Po...are you the same Pohaku that's a mod on another "unamed" site?

If I could afford it..... I'd order one for here: http://www.ribbecke.com/special/special.htm