easyrider's latest activity

Hi there Easyrider. Now I know I shall get stick for mentioning it AGAIN but do join the soundonsound.com forum and check their vast...

Thanks for the reply. I’m looking at DB25 connector as I’m going into my DB25 ins and outs on my Audient ASP 880 over ADAT to...

A lot depends on your use case. Preamps only or mix of I/O such as EQ and Comps? Power is a big consideration as some modules can be...

Good clean recordings can be had with cheap modern day interfaces…. But it’s not just about that…it’s how much clean gain the pre amp...

Please could you recommend a 8 unit 500 series rack? Any other things to consider before I enter the rabbit hole? Cheers

Looking at the pic I would say if you want to get some room with figure 8 I would put it up nearer the ceiling ~ 1-1.5 feet...

Sure, I want to experiment with new microphones and placement and recording using different mics. I didn’t have £1000 to spend on one...

I want to try an M88 on the Kick, a Mono M160 OH a Cole’s room a M201 on snare etc…and have a play…the Shure DMK57-52 Drum Microphone...

Here's a cheap experiment. Take a Sm57 and point it at one of the side walls. Like twoo inches off the wall and crush it with a compressor.

It’s got bass traps in the corners and few acoustic panels…I’m just looking at adding some space to my OH mics and close mics.

You have the null point of the Fig 8 pointing at the kit from say at distance

I currently have 6 mics on the kit….I want to add 7th mono room mic.

Want to use a mono room mic The room is a double Garage size.

Fig 8 Drum Room Mic Looking at a 24/7 Drum Room mic….I was going to use Fig 8 mode off axis… Set and forget…. Any ideas ? Thanks