Recent content by bearhead

Yes, I've done all of that, for every input too.

It's the same thing with both types of cables. I'm not sure why it works with an adapter, but not with the cable unless it's partly plugged in. Oh, XLR works just fine btw...

The two cables I have coming out of my effects pedal are, but the cable going into the pedal (which is the cable I used a minute ago) is mono.

I just plugged my guitar directly in and I didn't get any sound. So I tried pulling the plug out a little and I get audio if I have it plugged in partially. Wonder why that's happening...

Basically what I'm talking about is that you don't hear the drums in the mix on channels A - G. I don't know what that's called, but the same thing happens if you have your headphones plugged in halfway. I tried different adapters. And yes, both the 1/8" cable and the 1/4" adapter are TRS.

Alright, so I tried it with the guitar switch on and off using my laptop again, and I got sound both ways. One other thing I noticed is that I only get some of the audio from every other channel except H. The same effect as when you have your headphone cable plugged in half way. But I know all...

I just plugged up my laptop to play audio out into the channel, and I'm getting signal just fine. Also I noticed a minute ago that when I remove the cable, the pop is audible. So why not my guitar pedal? It works for every other channel, with and without the pedal (guitar directly into the...

I have the trim set half-way. I turned it all the way up to see if the OL light would come on, but it didn't. I have my guitar plugged up to my multi effects pedal, at line level btw. The faders are up, the REC button is engaged, and the channel is properly assigned.

Thanks for the reply! However, I have tried plugging in directly with the guitar setting switched on, then off to line. No sound. I then plugged in my multi effects pedal to it and the same thing happened.

Upon further inspection, I found that I can get signal from every other input except H. Do I have a dead channel?

Hey everyone, I just received my DP-24 today, and when I went to plug in my guitar and start recording, I could not get any sound out of it. Now I've already looked through threads about this issue, but nothing has seemed to help. I updated the firmware to the latest version (1.01 0008 or...

Quick question... Do the MKI and MKII share the same heads? I'm thinking of buying a cheap broken 488 to salvage its heads because I need to replace the heads on my MKII.

I do know a few people who are more handy with this type of stuff, electronics wise. I could have them look into that a bit more. You've helped me get a clearer idea of what could be wrong with it. I'd like to think it's not permanent damage, nor expensive to fix if I do have someone else get...

I saw this thread a while back when my 414 started eating tapes. Still never fixed it... I really appreciate the help you've given me so far, but I really don't want to risk opening up the recorder. I could easily damage it due to my lack of knowledge as far as electronics go. Any other thoughts?

Like I said, when I cleaned the heads earlier, nothing appeared on the q tip. I can try cleaning them again for a little longer, but I don't see that fixing anything. I feel like the issue could be more pointed in the direction of the last two in your list of speculation as I've tried cleaning...