Recent content by altruistica

Thanks JP. I seem to remember you have a TSR8 yes?

It's actually 8 pins

I thought I had posted this yesterday.....I think I forgot to press 'post reply' as it was waiting on me.

I've had a look at the schematics for the 688, the TSR8 and the 238. They all have the 8-pin DIN plug and if my interpretations of the schematics are correct, have the correct voltages on the pins. Anybody have time to verify this on the schematics I've uploaded? Thanks Al

I know from the TSR8 manual that the remote for this machine is the RC-408 but they are hard to come by. The remote for Tascam's range of 8-track multi-trackers, the 688, and the 238 is the RC-88 unit. I have read on various forums that the later remote the RC-88 will in fact work with the TSR8...

Probably would have made $2000-$3000 on Ebay depending on who was bidding....I'd say you got the bargain of the century. Well done.

Thanks Skywave for those very in-depth replies. It is much appreciated. There is a tech who I used to repair my daughter's i-Pad who can solder / repair tiny stuff, so when the time comes I may reach out to him about transferring the coils. On the machine I bought from the Netherlands, a tech...

Thanks for the replies guys. You must remember the USA is a helluva big place.....350million people compared to England with 55million. Finding anybody alive here that can fix tape recorders is difficult. I had to travel 250 miles with the Fostex G24S machines to find someone who knew what they...

This reminds me of a 'Black Mirror' episode https://en.wikipedia.org/wiki/Fifteen_Million_Merits ......is this how we power the future?

Wow JP....I'm just watching the following video on 'synchronous reluctance motors' and the thought of the four coils came to mind....look at the following video (it's all very interesting but the bit in question is at 6mins 45secs).

This is a great thread Cory. Well done. I'm just re-reading it as I've ordered a few boards from the US to try to sort out the one machine that is playing back too quickly. I removed the covers again today to compare the two machines I have. The one I received that has had a new board, has this...

You're welcome.

Watch the whole of this film and see if the bit at 13mins relates to your problem.