Recently during a recording session, I thought I had everything set as far as levels were concerned. However, when going over the audio later, I discovered that I had a few places where I had clipping issues. So here's my question:
Is it reasonable to set the trims so that recording levels max out say between -6db and 0db and then set a limiter at 0db so that the compression ratio for everything above 0db is essentially infinite? It seems to me that this would avoid having to worry about missing a spike here and there.
Is it reasonable to set the trims so that recording levels max out say between -6db and 0db and then set a limiter at 0db so that the compression ratio for everything above 0db is essentially infinite? It seems to me that this would avoid having to worry about missing a spike here and there.