Results 1 to 5 of 5

Thread: Help getting rid of line noise?

  1. #1
    Join Date
    May 2015
    Posts
    4
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Help getting rid of line noise?

    Sign in to disable this ad
    This may be my first post in the Homerecording.com forum, but I read content here a lot and gt the weekly newsletter. Anyway..

    I have this line noise coming through my signal chain(s), and cannot identify its origin or how to rid myself of it?

    Here is my signal path (identical signal chain x2):

    SOURCE: 6 string electric > Alesis QuadraVerb GT > guitar amp

    MiC/SIGNAL CHAIN:
    Shure SM57 > XLR > Behringer Ultragain t1953 > Pyramid PEQ60 > dbx266XL (tested/bypassed and not issue) > Focusrite Scarlett 18i8 > REAPER (only an iVGI trim plugin for proper gain staging - again tested and not the issue)

    Guitar to amp is all unbalanced and mic signal chain is all balanced. I have considered that the issue might be the amp, but the person that I am recording refuses to change/turn down the level.. so I cannot test that that factor.

    Most of the cables are brand new and the rest are all tested and or working proper.. Am just very confused about on what the issue could be. The microphones are brand new as well....

    I've tried just turning things down as much as I can and that does not solve my problem either. One thought I have is that my tubes are causing the problem. I have replacements on the way. I have not eliminated the t1953 from the chain so as to test that factor. Reason is that I want it to be part of the tone.

    I was trying to use the gate on the 266XL to rid myself of the line noise, but I couldn't quite get it. I tried a plugin as well (against my ethics even).. still couldn't get it. This may just be due to my low skill level with gates.

    Well, I have rambled enough. Hopefully somebody can help me solve my problem.
    Thanks in advance.

  2. #2
    Join Date
    Jun 2010
    Location
    Douglas, Az.
    Posts
    1,891
    Thanks
    73
    Thanked 146 Times in 144 Posts
    Rep Power
    160594
    Sorry, but you have to take stuff out of the chain to see if it is hardware.

  3. #3
    Join Date
    Oct 2005
    Location
    Ranelagh Tasmania
    Age
    66
    Posts
    7,268
    Thanks
    149
    Thanked 466 Times in 376 Posts
    Rep Power
    21474855
    What he says ^^^^

    1 With nothing plugged into the amp and the amp turned on, is the noise present?

    2 With the guitar plugged straight into the amp (no quadraverb) is the noise present?

    3 Connect the mike directly to the interface and see if the noise persists.

    4 Progressively add bits unitl the noise starts.

    5 If the noise is there no matter what you do, you may be picking up computer noise.

  4. #4
    Join Date
    Aug 2005
    Location
    U.K.
    Age
    32
    Posts
    17,788
    Thanks
    854
    Thanked 722 Times in 644 Posts
    Rep Power
    1000000
    +1 to the above.

    Also, be aware that sometimes and amplifier or preamplifier, and input device connected, can be a little noisy.
    When you're troubleshooting, just keep this in mind.

    If you're struggling, an mp3 clip of the noise you're chasing might help.
    Quote Originally Posted by Grawlf View Post
    That's a tad too much terminology. What do you mean by 'mix'?
    Quote Originally Posted by Steenamaroo View Post
    No VST can emulate that smell.

  5. #5
    Join Date
    Feb 2009
    Location
    northampton uk home of Dr Who and Blackstar Amps!
    Posts
    7,164
    Thanks
    1
    Thanked 328 Times in 314 Posts
    Rep Power
    8326791
    Yes, we need an MP3 clip (and do it at best bit rate. 30 secs or so is plenty but include guitar played AND guitar shut tfup so the noise is isolated)

    But,butty but but! The guitar/amp combination is an inherently noisy system. People tend not to notice how noisy until they apply the "microscope" of digital recording. In my limited experience you are unlikely to get even a DI'ed guitar better than -70dBFS i.e. just a bit better than the best a tape machine could do! The amplifier will, in most cases, add to that noise floor.

    Dave.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. line noise
    By catpuke in forum Microphones
    Replies: 20
    Last Post: 01-13-2005, 19:46
  2. Computer Line Noise
    By Venesectrix in forum Digital Recording & Computers
    Replies: 4
    Last Post: 02-03-2004, 12:22
  3. Line Noise
    By mapeterson in forum Cool Edit Pro / Adobe Audition Forum
    Replies: 0
    Last Post: 01-11-2002, 03:02
  4. Can someone help with mackie line noise ?
    By jant in forum Mixing Techniques
    Replies: 2
    Last Post: 09-10-2000, 14:47
  5. Line noise
    By Jamminjimmy in forum Newbies
    Replies: 1
    Last Post: 11-02-1999, 19:18

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •