Balanced? EV mixer to delta1010

mike535i

New member
I have a Electrovoice BK-1632 and a M-audio delta1010. I want to be sure to have a completely balanced setup. the mixer has balanced XLR ins, but the output format i am not familiar with. There are 1/4" jacks for every channel and there is a diagram for these jacks that looks like when a stereo plug is inserted, the tip of the plug is INPUT, and the ring is OUTPUT.

Now, is the OUTPUT from the mixer balanced? I will be running the out signal of the mixer into the balanced inputs of the delta1010. Any info is greatly appreciated.

Thanks.

-mike
 
mike535i said:

...There are 1/4" jacks for every channel and there is a diagram for these jacks that looks like when a stereo plug is inserted, the tip of the plug is INPUT, and the ring is OUTPUT.


Those sound like insert points, basically an unbalanced send and return on one jack for patching in things like compressors or noise gates.
If you can get your hands on a manual it should say which 1/4" connectors are balanced.
 
Back
Top